#DD WRT SUPERCHANNEL ACTIVATION KEY ACTIVATION KEY#
#DD WRT SUPERCHANNEL ACTIVATION KEY INSTALL#

You are now ready to power up the GW2348 for the first time.

Remove any reference to a GATEWAY address as well as references to DNS servers on this adapter's configuration. Manually configure the TCP/IP settings of this ethernet adapter as follows: Select the local area connection item that corresponds to the ethernet adapter you connected to the GW2348. Next, open the Windows control panel and go into the network connections page. The eth0 port is the one closest to the power connector on the GW2348. Connect the ethernet cable between the ethernet port on the computer and the eth0 port on the GW2348. Plug the serial cable between the serial port on the computer and the serial port on the GW2348. When all the files have been downloaded and installed as needed in the computer it is time to set up the computer to connect to the GW2348 board.

#DD WRT SUPERCHANNEL ACTIVATION KEY ACTIVATION KEY#

While you are on the DD-WRT website, visit the online store and purchase an activation key for the GATEWORKS firmware. For the purposes of these instructions you will not need to download the file gateworx-firmware-squashfs.bin as we won't be using it. These two files should be saved in the TFTP Root directory you created when you installed TFTPD32. Next, choose the build that you are comfortable with (generally the most recent) and download root.fs and zimage. The first file you should get is flashing.txt which describes, albeit in very abbreviated terms, the essential information required to complete the process of flashing DD-WRT firmware onto the GW2348 board. The firmware is (as of this writing) located under the beta subsection in a directory called AVILA GATEWORKS. You will also need to download a copy of the firmware from the DD-WRT Downloads Hyperterminal which comes with Windows XP but you can use another if you wish. You will also need a terminal program to communicate with the GW2348 over its serial port. Have one, download a TFTP server for your computer.

#DD WRT SUPERCHANNEL ACTIVATION KEY INSTALL#

Coaxial power plug (2.5В mm x 5.5В mm available from Radio Shack)Д«efore you begin you will need to download and install some tools unless you already have them.

Computer (I use a laptop with wireless internet connectivity as well as an ethernet port).

To install the firmware you will need the following tools: Installing DD-WRT on the GW2348 board is relatively simple. They are well built, flexible, and relatively much lower in cost than mostДЇor more information see: Avila Gateworks GW234x

The Gateworks GW234x series Network Processor boards provide an excellent platform for building high performance If you are using a GW2348-2 or GW2347 there are subtle but important differences in the flashing commands you must use. Please note: The details in these instructions apply specifically to the GW2348-4 board.

Dd wrt superchannel activation key